Why 2D code verification is becoming part of production lines

Why 2D code verification is becoming part of production lines
X The Business Desk

Register for free to receive latest news stories direct to your inbox

Register

Manufacturers have become remarkably good at printing codes, applying everything from batch numbers and best-before dates to serial numbers, along with Data Matrix codes and QR codes, and at full production speed.

You will find those marks on cartons, labels, pharmaceutical packs and individual components, often carrying information that matters long after the product has left the factory. Yet printing a code, scanning it and proving that it is fit for purpose are three very different things.

Today, that distinction matters more than ever because manufacturers are placing greater amounts of information into 2D codes and relying on them for traceability, logistics, regulatory compliance and consumer-facing applications.

A QR code may scan perfectly on a mobile held at the right angle (and in good light), but that does not mean it will perform just as reliably on a fast production line, in a warehouse, at a distribution centre or at a retail checkout.

The question for manufacturers is therefore no longer simply:

“Can we print a QR code?”

The more important question is:

“Can we prove that every code we produce is readable, correctly structured and of sufficient quality for the systems that will depend on it?”

Answering it requires more than an ordinary scan. It requires verification.

Scanning tells you whether a code worked once and a conventional scanner gives a simple, binary answer: either it reads the code or it does not. That is useful in day-to-day operation, but it reveals very little about the margin between a reliable code and one that is close to failure.

A successful read can hide weaknesses that become apparent as soon as environmental conditions change, as they do in real life. A small shift in position, different lighting, a new batch of material or a slight decline in print quality may be enough to expose them.

Consider a QR code that is only just readable. A scanner directly in front of it may decode it without difficulty. Move the pack slightly, introduce vibration, change the substrate or allow the printhead to deteriorate, however, and that same code may fail further down the supply chain.

A successful scan therefore proves only that the code could be read under one set of conditions at one particular moment.

Verification goes further by asking how much confidence there is that the code will continue to work.

A verifier measures the characteristics that affect reliable decoding, including contrast, modulation, fixed-pattern damage and other factors defined by recognised standards. Instead of returning a simple “read” or “not read”, it provides an objective assessment of print quality and shows how much tolerance the code has before performance begins to suffer.

That distinction becomes crucial whenever the code still has work to do after it leaves the factory.

The move towards 2D makes code quality more important

Traditional barcodes have been extraordinarily successful, but manufacturing and retail are now moving towards codes capable of carrying far more information.

GS1 Digital Link, GS1 DataMatrix and QR-based applications can connect a physical product with digital information, carrying or referencing details such as identity, batch, expiry, traceability and product information.

For manufacturers, that creates valuable opportunities because one code can potentially support production, logistics, retail and consumer-facing uses. The benefit is clear, but so is the dependency it creates.

Much more now rests on the small, printed square remaining readable throughout the product’s journey. Once a code becomes the route to traceability data, product identification or downstream automation, poor print quality is no longer merely a cosmetic issue; it is a process risk.

A weak code can disrupt systems far beyond the printer that produced it.

If it fails at the next machine, warehouse or customer, the result may be manual intervention, rejected product, interrupted production and a time-consuming investigation.

The ink used to print a QR code costs very little, whereas discovering later that thousands of those codes were printed badly can be extremely expensive.

The earlier a problem is found, the smaller that cost is likely to be.

Why “looks fine” is a dangerous quality standard

The difficulty is that the human eye is not a barcode-verification system. A QR code can look perfectly acceptable while containing defects that make it less reliable to decode.

The reverse is also true: a code that looks slightly untidy may still be technically robust.

Appearance alone is therefore a poor basis for deciding whether a code is fit for use.

This is precisely why international verification standards exist.

For 2D codes, ISO/IEC 15415 provides a method for assessing print quality. For traditional linear barcodes, ISO/IEC 15416 performs a similar role.

Instead of relying on appearance or testing a handful of samples with an ordinary scanner, manufacturers can measure code quality against defined criteria.

For production and quality teams, that provides something far more useful than intuition: a repeatable measurement and a common basis for deciding whether a code is acceptable.

It also makes it easier to identify deterioration before it becomes a visible failure.

This is particularly important when codes are produced dynamically rather than supplied as fixed, pre-printed artwork.

Pre-printed packaging may have been checked before it reaches the line, but a variable QR or Data Matrix code generated during manufacture is different because every print may be unique.

There is no single artwork to approve once and forget; quality has to be maintained continuously.

The production process itself must therefore create a code of sufficient quality every time.

Verification does not have to happen in a laboratory

Verification was once treated mainly as a separate quality-control exercise: print a sample, take it to a verifier, measure it and confirm that the process is working.

That approach remains useful, and random sampling still has an important role, but it can only show what was happening at the moment the sample was taken.

Between one check and the next, conditions may change and a large volume of product may be printed.

This is what makes inline verification such an important development.

Systems such as the REA VeriMax can be built into a production line to assess 1D and 2D codes as part of the manufacturing process itself.

That brings printing and verification into the same workflow rather than treating them as separate activities.

Instead of printing first and discovering a problem later, manufacturers can monitor code quality while production is under way.

At high volumes, the difference can be substantial.

When a decline in print quality is detected close to the point where it begins, teams can respond before a small fault creates a large quantity of suspect product.

The aim is not simply to inspect more codes, but to reduce the time between creating a problem and knowing that it exists.

That shorter feedback loop can turn verification from a retrospective check into a practical form of process control.

Printing and verification work better when they are designed together

REA’s approach is distinctive because coding and verification sit within the same broader technology portfolio.

REA JET manufactures industrial coding equipment, while REA VERIFIER provides verification systems, allowing printing and quality measurement to be considered as parts of one production process.

For example, REA’s high-resolution thermal inkjet printers can produce machine-readable 1D and 2D codes, while REA VERIFIER technology can be integrated into the line to assess their quality.

That may sound like a small distinction, but it matters from an engineering perspective because a production line needs the two systems to work together, regardless of which departmental budget paid for them.

The quality of the finished mark is shaped by the whole process, not by one piece of equipment in isolation.

Print settings, substrate, ink, production speed, code dimensions, positioning and verification all have an effect.

If any one of them drifts, readability can suffer even though the code still looks acceptable.

Treating verification as part of the coding process therefore makes far more sense than adding it later as an unrelated inspection task.

REA JET UK is among a relatively small group of industrial marking specialists able to address both sides of that equation within an integrated workflow.

QR verification becomes even more important at production speed

A QR code printed perfectly during a slow commissioning test tells you relatively little about how the process will behave over thousands of production cycles, because real manufacturing is full of variation.

Products move, packaging changes and printheads become contaminated or shift slightly out of position.

Substrate surfaces vary, ink behaves differently as operating conditions change, and production speeds rise.

Maintenance is carried out and operators adjust settings, sometimes introducing small changes that are difficult to notice immediately.

Individually, these variations may seem minor, but together they can alter the conditions under which a code is printed.

A process that performed well during commissioning can gradually drift away from its validated state without producing an obvious warning.

The change may be slow enough to escape casual inspection, even as the margin of quality narrows.

By the time failures become obvious downstream, a substantial volume may already have been produced.

This is where inline verification earns its place on the production line.

By monitoring code quality continuously, it can make process drift visible much earlier.

Manufacturers no longer have to wait for downstream rejection rates to rise before they know something has changed.

They can investigate while the problem is still small and close to its source.

That matters particularly when the goal is a high first-pass read rate.

In automated logistics or high-speed manufacturing, “readable eventually” is not a meaningful quality standard.

A code that needs two or three attempts may technically scan, but it is already introducing delay, uncertainty and unnecessary handling.

The code that matters is the one downstream equipment reads correctly the first time.

The next generation of product identification is a quality problem as much as a printing problem

QR codes, 2D codes and the richer information they can provide have attracted considerable attention, but the technology succeeds only if the physical link between the product and its data remains dependable.

That link is the printed code, and its quality cannot be treated as an afterthought.

A sophisticated data structure is of little value if the mark carrying it cannot be read reliably.

Manufacturers planning a new 2D-code project should therefore ask a few practical questions at the outset:

Can the chosen printing technology produce the required code consistently at production speed?

Is the code being created with the correct structure and data?

How will print quality be measured?

What standard will define acceptable quality?

Will verification be based on occasional samples, or does the process justify continuous inline checking?

And what happens when the quality begins to move outside the acceptable range?

These questions are far easier to answer before a line enters production than after unreadable codes begin appearing downstream.

Print. Read. Verify.

Industrial coding is no longer simply about putting a date on a box. The marks produced today increasingly form part of the data infrastructure around a product.

They may connect manufacturing records, logistics systems, retailers, regulators and, ultimately, the person holding the product.

In that environment, a code is no longer just a mark on packaging; it is an entry point into a much wider chain of information.

That makes reliability essential rather than optional.

A smartphone reading a QR code is reassuring, but it demonstrates only that the code worked once under a particular set of conditions.

A standards-based verification system showing that the code was produced correctly provides something more valuable: evidence that it has the quality margin needed to keep working.

For manufacturers adopting 2D codes at scale, that is the distinction that matters.

Printing the code is only half the job; the other half is proving that it will work when and where it is needed.

As more processes come to depend on that small printed square, verification is becoming part of production itself.

 

Close