Company fined after worker has crushed arm amputated

Littleborough-based company Ken Mills Engineering Ltd has been fined for safety breaches after a 48-year-old worker suffered a life-threatening injury in West Yorkshire.

Leeds Crown Court heard that on 9 February 9 2017, the 48-year-old worker was repairing a Trojan Haylage Baler at New Hall Farm, Grange Moor, Wakefield, when his left arm was trapped and crushed by a hydraulic ram.

The arm was partially severed at the scene; required several operations and following medical complications was amputated from above the elbow.

An investigation by the Health and Safety Executive (HSE) found several engineers had been involved over a number of days to repair the baler.

This work had not been subject to a risk assessment and engineers were not provided with effective information, instruction and training for this activity. They were left to devise their own system of work, which consequently was not safe.

Engineers relied on techniques they were familiar with from the factory which were not suitable for the site circumstances. As a result, the vertical compaction ram was inadvertently started, trapping the worker’s arm.

Ken Mills Engineering Ltd of Greenvale Business Park, Littleborough was found guilty of breaching Section 2 (1) of the Health & Safety at Work etc Act 1974.

The company has been fined £18,000 and ordered to pay £50,494.18 in costs.

After the hearing, HSE inspector Louise Redgrove said: “It was reasonably practicable for Ken Mills Engineering Ltd to have done more to ensure engineers were working safely.

“This incident could have easily been prevented if the company had assessed the repair activity; identified site specific hazards and typical custom and practice, provided a safe working procedure and then effective information, instruction and training for that procedure and the repair work that day.”

Click here to sign up to receive our new South West business news...
Close