Companies sentenced after construction site worker hospitalised

Two construction companies – including one based in Yorkshire – have been sentenced after a worker was hospitalised for nearly two weeks due to being struck by a 124kg panel.

The man was working as a lift supervisor at a construction site at Eskdale Terrace, Jesmond, Newcastle, on 22 January 2020.

He had been using a tower crane to lift a structured insulated panel (SIP). During the lifting operation, the SIP struck steelwork and fell on top of the worker.

He spent 13 days in hospital following the incident after fracturing his collarbone, shoulder blade, left ankle and left rib.

An investigation by the Health and Safety Executive (HSE) found Tolent Construction Ltd, the principal contractor, had failed to properly plan, manage and monitor the construction phase.

This resulted in a failure to ensure a suitable and sufficient lift plan was in place for the lifting of individual SIPs.

Most importantly, the lift plan failed to stipulate how the individual SIPs were to be safely lifted and failed to consider proximity hazards or how the SIPs would be adequately controlled during the lifting operation.

HSE’s investigation also identified West Yorkshire-based Clad Build UK Ltd (trading as SIP Build UK), as the contractor responsible for the design, supply and installation of the SIPs.

Clad Build UK failed to plan, manage and monitor the work or to provide the necessary information and instruction to workers on how to prepare the SIPs for lifting.

It also failed to ensure effective supervision and monitoring of work being undertaken by a sub-contractor working under its control and to comply with requests for information from the principal contractor.

Tolent Construction, of Grey Street, Newcastle, pleaded guilty to contravening Regulation 13 (1) of the Construction (Design and Management) Regulations 2015. The company was fined £1,000 and ordered to pay £8,468.50 in costs.

Clad Build UK, of Foxbridge Way, Normanton Industrial Estate, Normanton, pleaded guilty to contravening Regulation 15 (2) of the Construction (Design and Management) Regulations 2015. The company was fined £12,000 and ordered to pay £45,000 in costs.

HSE inspector, Stuart Whitesmith, said: “HSE will not hesitate to take enforcement action against those that fall below the required standards.

“This case should raise awareness of the dangers of failing to properly plan and safely carry out this type of lifting operation.

“SIPs are increasingly used in the construction industry and all contractors should be aware of the need to suitably plan, manage and monitor their safe installation.”

Close